... for whatever reason I used 2 upper arms - there is no stud for damper on the lower arm ...
this is how it should look like:
Samstag, 7. September 2013
spot the failure!
During a late night assembly session I worked on the front beam, what went wrong here? - can you spot the failure (besides the incorrect, not fully seated arm position?)
... for whatever reason I used 2 upper arms - there is no stud for damper on the lower arm ...
this is how it should look like:
... for whatever reason I used 2 upper arms - there is no stud for damper on the lower arm ...
this is how it should look like:
Abonnieren
Kommentare zum Post (Atom)
Keine Kommentare:
Kommentar veröffentlichen