rear brakes sorted!

After Jens' comment about a wrong assembled rear brake I fixed this right away!

 ( the upper spring was assembled the wrong way - note the bended shape)

... in detail:

... and fixed! Almost exact parallel - as Ferdinand designed it!

A short check inside the other drum showed once more that Murphy's law is always valid!
What can go wrong, will go wrong!
... this spring was also not in the right position!

 ... and, also fixed! Now Jens and Ferdinand should be happy again :-)

 Note: After several trials I found out that the the black spring clip has also different positions between left and right! Due to the fact that the equalizer bar is used in LH and RH drum brakes, with the exact same shape (not symmetric opposite)  the dimple is sometimes showing up or down, so the spring clip has to be attached accordingly!